Full technical specifications, application conditions and coating instructions
Elastic vapor-permeable deep matte paint, odorless with self-cleaning properties. After application the coating has high elastic properties and preserves vapor permeability. Meets European VOC standards. Certified for medical institutions.
Recommended for exterior and interior finishing of surfaces, plinths, basements, garages, common areas and parking lots, technical facilities and sea port buildings, houses in coastal areas, interiors with high humidity and poor ventilation. Suitable for waterproofing while preserving vapor permeability and for cracked surfaces.
| Theoretical yield | 6–8 м²/л |
| Density | 1,3–1,4 кг/л |
| Viscosity | 80 000–100 000 сПз |
| Weight solids | 68% |
| pH | 7–9 |
| Application temperature | +5 до +35°C |
| Humidity | менее 85% |
| Touch dry | 30 минут |
| Intercoat drying | 2–4 часа |
| Full drying | 24 часа |
| Washability | Class 1 по ISO 11998, EN 13300 |
| Heat resistance | 90°C (ISO 4211-2 и ISO 4211-3) |
| UV resistance | 2,0% GOST 21903-76 |
| Packaging | 0,75 л · 4 л · 15 л |
| Shelf life | 2 года при t° +5…+30°C |
New surfaces: Ensure surface is fully dry — at least 4 weeks for civil plasters and 2 weeks for premixed plasters. Level any imperfections, sand and clean. Apply 1–2 coats of PRIMER NORMAL.
Painted surfaces: Remove old peeling paint, fill and smooth any imperfections. Sand and clean. Apply 1–2 coats of PRIMER NORMAL.
White base, tintable in RAL, NCS, NCP color systems. UV-resistant pigments recommended for exterior. For dark colors dilute concentrated PRIMER NORMAL with water 1:5.
| Plastogum P/T (белый) | For light shades (+95 THB/л) |
| Plastogum D/A (белый) | For dark and bright colors (+165 THB/л) |
High-quality satin acrylic paint for interior and exterior use with inert ceramic filler. Creates surfaces with excellent cleanability and enhanced resistance to abrasion. Wet Abrasion Class 1 (DIN 53 778). Approved for food production facilities.
Ideal for surfaces requiring exceptional cleanability: commercial and office buildings, schools, gyms, healthcare institutions. Compatible with plastered and pre-painted walls, concrete, fiber cement boards, drywall, fiberglass wallpaper.
| Theoretical yield | 5–6 м²/л |
| Density | 1,2–1,25 кг/л |
| Film thickness | 40–50 мкм |
| pH | 7–8 |
| Application temperature | +5 до +35°C |
| Humidity | менее 85% |
| Touch dry | 30–60 минут |
| Intercoat drying | 5–6 часов |
| Full drying | 24 часа |
| Wet abrasion resistance | Class 1 (DIN 53 778) |
| Packaging | 1 л · 4 л · 15 л |
| Shelf life | 24 месяца при t° +5…+30°C |
New surfaces: Apply 1–2 coats of PRIMER NORMAL diluted 1:8 with water. Intercoat drying: 2 hours, full cure: 4–6 hours.
Old painted surfaces: Remove mold with special cleaner. Strip old paint and sand. Sand glossy surfaces to matte. Fill cracks with ORSO INFINITY putty. Apply 1–2 coats PRIMER NORMAL.
| Mr Quarzo P/T (чисто белый) | For light and pastel shades (+95 THB/л) |
| Mr Quarzo D/A (полупрозрачный) | For dark and vibrant colors (+195 THB/л) |